Rupert Neve 5060 Centerpiece 24×2 Desktop Mixer

Rupert Neve 5060 24×2 desktop mixer perfekt som center for det moderne studie.
5060 er en ægte Neve mixer i ultra kompakt format, den er i praksis en nedskallering af den store 5088 mixer og benytter samme mixbux/center-sektion som denne mixer. Det betyder at Rupert Neve transformers og Class-A mix buss, men også at tonaliteten kan varieres med hans “Silk” og et mix kan “drives” som man nu gør med en Neve mixer når man vil opnå den elskede “tone” og fyldighed som er et Neve trademark.

5060 er bygget så den forener Ruperts vission om lyd og summing, med det moderne kompakte studie, og den integreres nemt og overskueligt med DAW systemer, ikke bare med de analoge tilslutninger men også med DAW kontrol af de gængse start-stop-rec mv.

Connections

• Mix Inputs 1-24: 2 x DB-25
• Mix Channel Inserts Send/Return1-8: 1 x DB-25
• Mix Send to External Monitor:
• Monitor Outputs (Mon 3 latching): 6 x XLR
• Talkback Output: 1 x TRS
• Talkback Remote: 1 x TS
• Stereo Mix Insert/Return L-R: 4 x TRS
• Stereo Mix Output:2 x XLR

Midi In / Out: 2 x Midi
Computer Connection: USB
Power:3-Pin IEC
Dimensions

• 18.5″ wide x 12.5″ deep x 5.75″ high in the back (3.5″ in the front)

Stereo Outputs
(unless otherwise specified, frequency is 1 kHz)

• Channels 1-8 Max input level
• Fader at 0: 25.4 dBu
• Fader at +10: 15.2 dBu
• Channels 9-24 Max input level
• trim at 0: 25.4 dBu
• Max Output level
• Any combination of inputs: 25.4 dBu
• THD+N
• Channels 1-8, fader at unity, THD+N BW <10 Hz – 80k Hz
• +20 dBu, 20 Hz: 0.023%
• +20 dBu, 2 kHz: 0.0022%
• +20 dBu, 20 kHz: 0.016%
• Channels 9-24, trim at unity, THD+N BW <10 Hz – 80k Hz>
• +20 dBu, 20 Hz: 0.023%
• +20 dBu, 2 kHz: 0.0032%
• +20 dBu, 20 kHz: 0.017%
• Noise
• BW 22 Hz – 22 kHz
• Channels 1-24: Better than -90 dBV
• Channels 9-24: Better than -100 dBV
• X-talk
• + 10 dbu, 10 kH, L/R: -49 dB

Channel to channel

• CMRR at 1K input to channel 1, 0 dBu fader at unity: -70 dBu
• Frequency Response
• 10 Hz to 120 kHz: +/- 0.25 dB
• 185 kHz: -3 dB
• IMD
• +4 dBu, CCIF/DFD: 0.0008%
• Silk (Texture control at maximum)

Noise

• +20 dBu in, 20 Hz: Better than 5%
• +20 dBu in, 200 Hz: Better than 0.2%
• Frequency Response
• 0 dBu in, 20 kHz – 2.3 dBu
• Distortion
• +20 dBu in, 20 Hz –Better than 5%
• +20 dBu in, 200 Hz – Better than 0.15%
• Frequency Response
• 0 dBu in, 30 Hz: -1 dBu
• Peak LED’s:
• Trigger Threshold: +22 dBu

Monitor Outputs

• Max Output level 1 kHz: +25 dBu
• THD+N
• +20 dBu, 20 Hz: 0.023%
• +20 dBu, 2 kHz: 0.0032%
• +20 dBu, 20 kHz: 0.017%
• Noise
• 1-24: Better than -90 dBV
• 9-24: Better than -100 dBV
• Headphone Out
• Max output level: Better than +20 dBu, unloaded
• THD+N
• 2 kHz into 68 ohms, 16 dBu output: Better than 0.02%
• Noise (22 Hz – 22 kHz): Better than -85 dBV
• Minimum Load: 16 ohms recommended (8 absolute min)