Manley FORCE har fire ægte High Voltage vacuum tube mikrofon preamps, som er taget fra den utroligt populære og prisvindende Manley CORE og placeret i et udsøgt lækkert chassis håndbygget i Californien

Hver kanal indeholder:

7-Segment LED Peak Metering
Selectable Gain, LOW vs HIGH
120Hz High Pass Filter switch
Phase Invert switch
48V Phantom power switch
Input Attenuator (Variable Pad)
Silent Input Level Control (Variable Input Pad)
1/4″ DIRECT INPUT
DI-input er det samme som i Manley SLAM!® og Manley CORE®, et solid-state kredsløb med 10 Meg Ohm input impedance perfekt til guitar, bas, keyboard mm

Specifikationer

Vacuum Tubes: 4 x 12AX7WA dual triodes
Balanced Transformer Coupled XLR Microphone Input Impedance: 1250 Ohms
Unbalanced 1/4″ Direct Input Impedance: 10 Meg Ohm
Maximum Input Mic input (Low Gain Setting): -5 dBu or 435mV RMS @ 0.5% THD
Maximum Input Mic input (High Gain Setting): -25 dBu or 44mV RMS @ 0.5% THD
Maximum Input Direct input (Low Gain Setting): +24 dBu or 12V RMS @ 0.5% THD
Maximum Input Direct input (High Gain Setting): +17 dBu or 5.5V RMS @ 0.5% THD
Maximum Output (1kHz Sine, into 100 kOhm load, 0.1% THD+N: +35 dBu
Maximum Output (1kHz Sine, into 100 kOhm load, 0.1% THD+N: 43V RMS
Maximum Output (1kHz Sine, into 600 Ohms load, 0.1% THD+N): +22 dBm
Hi-current WFDRIVE Balanced Output Impedance: 50 Ohms
Output Headroom (referenced to +4 dBu): 31 dB
Dynamic Range: 118 dB @ LOW GAIN, 100 dB @ HI GAIN

THD & Noise (1Khz @ +4dBu BW 22Hz-22KHz): 0.004% at Low Gain setting
THD & Noise (1Khz @ +4dBu BW 22Hz-22KHz): 0.04% at Hi Gain setting
Noise Floor Micpre (A WGT): – 85dB @ LOW GAIN, -66dB @ HI GAIN
Signal to Noise Ratio (Ref. to +4dBu): 87dB @ LOW GAIN, 68dB @ HI GAIN
EIN (22-22kHz BW, A WGT): -129dB with 150 Ohm source impedance @ LO GAIN
Frequency Response: 20 Hz to 20 kHz -0.1dB, +0.3 dB
Gain via Microphone Input: 40 LOW or 50dB HI GAIN (60dB available via internal jumper)
Gain via Line Input: 20 or 30dB (40dB available via internal jumper)
Low Signal Green LED (Output Level): -22 dBu
High Signal Red LED (Output Level): +24 dBu
AUTOMUTE warmup delay: 30 seconds
Power consumption: 36 Watts
Operating mains voltage: 90 to 254 VAC (internal universal supply)
Mains Voltage Frequency: 50~60Hz
Dimensions: 19″ x 3 1/2″ x 7″ (occupies 2u)
Unit weight: 8.6 lbs.
Shipping weight: 11.8 lbs.